Tough Finish-2

$30.00$400.00

Tough Finish-2

          Available in Natural Matte or High Gloss (can be blended for a satin)

          Use Indoor or Outdoors / UV stable will not yellow

          Increase abrasion resistance

          Increase stain resistance

          Can be used over most other sealers/ coatings

          Easy application / Spray / Roll/ Mop

          Can be spot repaired / Buffed / Re-applied / No stripping needed

          Anti-skid version available for floors/ stairs and wet areas.

          Eliminates the need for wax.

Clear

Description

Tough Finish-2

          Available in Natural Matte or High Gloss (can be blended for a satin)

          Use Indoor or Outdoors / UV stable will not yellow

          Increase abrasion resistance

          Increase stain resistance

          Can be used over most other sealers/ coatings

          Easy application / Spray / Roll/ Mop

          Can be spot repaired / Buffed / Re-applied / No stripping needed

          Anti-skid version available for floors/ stairs and wet areas.

          Eliminates the need for wax.

Coverage Rate: 600-1200 sqft. per gallon first coat / 800-1500 sqft. Per gallon for additional coats

Surface Preparation: Surface must be clean and free of debris, oils, loose

sealer or coatings, soap and cleaning residues must be removed prior to application. A test area application is suggested.

Application: Once surface is clean TF -2 can be applied by pump spray and back

roll with a short nap roller or use a paint pad or microfiber mop. For countertops a

microfiber pad works well. Spread a thin layer of  TF-2 following the suggested

coverage rate and allow to dry for about 4-5 hours. Fans can be used to circulate air and expedite the curing process. Avoid over application it will cause a decrease in abrasion resistance and longer cure time.

Cure Time: Surface should be read y for light traffic in about 4 hour s, full cure

is 24 hours.

Post Application Care: To achieve a high gloss finish use a slow speed buffer

and white Scotchbrite or lambs wool pad (buffing compounds can assist with the

process but are not required) Clean surface with Non Abrasive,  non- acidic cleaner.

Safety: See SDS for full safety and handling instructions.

Additional information

Weight N/A
Dimensions N/A
Size

, ,

Finish

,

Anti-Skid

Anti-Skid, Standard

0

Start typing and press Enter to search