Options:

Water: required entry. Typical amount for countertops is 30% for GFRC premix (spray up/ hand pack application) and 25% for SCC premix (simple pour application).

Stage II accelerator: (makes the mix set faster) typical amount is 2-5% 2% = 25% more next day strength, plenty of working time after mixing 5% = 60% more next day strength, reduces working time to 20 minutes so once it is mixed get it in the form asap. Follow directions on TDS sheet.

Hydration Stabilizer: (makes the mix set slower for more working time) Typical amount is 0.2-0.5%. 0.2% adds 10-15 minutes to the working time at 75-90F 0.5% adds 45-60 minutes more working time at 75-90F Follow directions on TDS sheet. *NOTE* use a drill and mixing paddle to blend Hydration stabilizer into the water before adding water to your mix.

Fiber: (reinforcement to prevent structural cracking) Typical amount is 3% of ½” OR ¾”. HD anticrack (invisible in the mix and is used to prevent micro cracks when casting a face coat and back coat separately) Typical amount is 0.5%. Follow directions on TDS sheet *NOTE* add fiber after you have mixed the rest of the ingredients thoroughly.

Integral Color: Select your colors below. Typical amount is 0.5-5%. See typical color representations by clicking “select” below. *NOTE* several factors affect the actual color outcome and samples should be made prior to casting to verify actual color.